FEATURES

 

Intelligent Motion Systems has succeeded in developing a line of miniature high performance stepper motor drivers for today's quality minded, price sensitive market. Recognizing the wide variety of needs in a rapidly growing motion market, IMS has responded with some of the smallest, low cost stepper drives available today.

IMS has included features usually found only in the larger, more expensive drives - single supply, optically isolated inputs, half and full step, and a chopping rate of over 20 kHz that eliminates audible noise.

Both drivers come standard with sourcing inputs, but are also available in sinking input (-S) versions which eliminate the need to interface additional circuitry.

Their small size make the IB462 and IB463 ideal for PC board mounting, but they can also be frame or chassis mounted and will accept 0.200/0.196 center connectors or plug type terminal strips.

The IB462 and IB463 are just two in our growing line of high performance, cost effective drives.

The IB462

The IB462, our smallest and lowest priced drive, packs a powerful 160 watts into less than 8.6 cubic inches.

IB462 will effortlessly output up to 2 Amps per phase.

The IB462 operates from 12 to 40 Volts. This high voltage allows for greater speeds at higher torque without resorting to expensive drives or larger motors.

The high efficiency of the IB462 chopper drive, along with its miniature size, makes it ideally suited to replace the less efficient L/R drives. In addition, the low cost and off-the-shelf availability of the IB462 permits an immediate, cost effective solution to an in-house design.

The IB463

With an output capability of up to 3.5 amps per phase, the IB463, which is only slightly larger than the IB462, can deliver 1.4 times more power.

Although the IB463 circuit fits into an area of less than 10.7 cubic inches, it is capable of delivering a powerful 230 watts!

The IB463 is ideal for those applications requiring more power, but where size and cost are still important factors.
                    [back to top]

          

POWER SUPPLY

Power Supply IP402
Input Voltage 120 or 240 VAC
Input Frequency 50 - 60 Hz
No Load Output
  Voltage
39 VDC @ 0 Amp
Continuous Output
  Rating (Half Load)
30 VDC @ 1 Amp
Peak Output 25 VDC @ 2 Amp
Type unregulated linear
                   [back to top]
 
High Performance Miniature Bipolar Stepping Motor Drivers
 

IMS Logo Wide

370 N. Main St., P.O. Box 457
Marlborough, CT 06447 U.S.A.
Phone: 860 / 295-6102
Fax: 860 / 295-6107
Email: info@imshome.com

Contact

TECHNICAL SUPPORT (U.S.A.)
Phone: 860 / 295-6102
Fax: 860 / 295-6107
E-mail: etech@imshome.com

IMS ASIA PACIFIC OFFICE
30 Raffles Pl., 23-00 Chevron House
Singapore 048622
Phone: +65 / 6233 / 6846
Fax: +65 / 6233 / 5044
E-mail: wllee@imshome.com

IMS EUROPEAN SALES MGT.
4 Quai Des Etroits
69005 Lyon, France
Phone: +33 / 4 7256 5113
Fax: +33 / 4 7838 1537
E-mail: bmartinez@imshome.com

IMS UK Ltd
.
Sanderson Centre
15 Lees Lane
Gosport,Hampshire, UK  PO12 3UL
Phone: +44 / 0 2392 520775
Fax: +44 / 0 2392 502559
E-mail: mcheckley@imshome.com

U.S.A. SALES OFFICES
Eastern Region 

Phone: 973 / 661-1270
Fax: 973 / 661-1275
E-mail: jroake@imshome.com

Central Region
Phone: 260 / 402-6016
Fax: 419 / 858-0375
E-mail: dwaksman@imshome.com

Western Region
Phone: 602 / 578-7201
E-mail: dweisenberger@imshome.com